Handling Flow
> Documentation > Docs > INFINI Gateway > References > Handling Flow

Handling Flow #

Flow Definition #

Requests received by each gateway are handled through a series of processes and then results are returned to the client. A process is called a flow in INFINI Gateway. See the following example.

flow:
  - name: hello_world
    filter:
      - echo:
          message: "hello gateway\n"
          repeat: 1
  - name: not_found
    filter:
      - echo:
          message: '404 not found\n'
          repeat: 1

The above example defines two flows: hello_world and not_found. Each flow uses a filter named echo to output a string. A series of filters can be defined in each flow and they are executed in the defined sequence.

Syntax Description #

INFINI Gateway defines a flow in the stipulated format and supports flexible conditional parameters for logical judgment. The specific format is defined as follows:

flow:
  - name: <flow_name>
    filter:
      - <filter_name>:
          when:
            <condition>
          <parameters>
      - <filter_name>:
          when:
            <condition>
          <parameters>
    ...

In the format defined above, filter_name indicates the name of a filter, which is used to execute a specific task. condition below when is used to define specific conditional parameters for executing the task, and the filter task is skipped when the conditions are not met. In parameters, parameters related to the filter are set, and the parameters are separated by the line feed character.

Conditional Judgment #

Complex logical judgments can be defined in a flow of INFINI Gateway so that a filter can be executed only when certain conditions are met. See the following example.

filter:
  - if:
      <condition>
    then:
      - <filter_name>:
          <parameters>
      - <filter_name>:
          <parameters>
      ...
    else:
      - <filter_name>:
          <parameters>
      - <filter_name>:
          <parameters>
      ...

Parameter Description #

NameTypeDescription
thenarrayA series of filters to be executed only when conditions defined in condition are met.
elsearrayA set of filters to be executed only when the conditions are not met. You do not have to set it.

You can use if to make conditional judgment and logical selection in the case of multiple filters and use when to determine whether to execute a single filter.

Condition Type #

For various condition defined in a flow, you can use the current request context to judge whether a specific condition is met so as to achieve logical processing. The conditions support the combination of Boolean expressions (AND, NOT, and OR). The complete list of condition types is as follows:

  • equals
  • contains
  • prefix
  • suffix
  • regexp
  • range
  • network
  • exists
  • in
  • queue_has_lag
  • consumer_has_lag
  • cluster_available
  • or
  • and
  • not

equals #

The equals condition is used to judge whether the content of a field is the specified value. It is used for the exact match of characters and digits.

The following example determines whether the request method is of the GET type and _ctx is a specific keyword for accessing the request context:

equals:
  _ctx.request.method: GET

contains #

The contains condition is used to judge whether the content of a field contains a specific character value. Only support string field.

The following example judges whether the returned response body contains an error keyword:

contains:
  _ctx.response.body: "error"

prefix #

Use the prefix condition to determine whether the contents of a field begin with a specific character value, Only support string field.

The following example determines that the returned request path starts with a specific index name:

prefix:
  _ctx.request.path: "/filebeat"

suffix #

Use the suffix condition to determine whether the content of a field ends with a specific character value. Only support string field.

The following example determines whether the request is a search request:

suffix:
  _ctx.request.path: "/_search"

regexp #

The regexp condition is used to judge whether the content of a field meets the matching rules of a regular expression. Only support string field.

The following example judges whether the request URI is a query request:

regexp:
  _ctx.request.uri: ".*/_search"

range #

The range condition is used to judge whether the value of a field meets a specific range. It supports the lt, lte, gt, and gte types and only numeric fields are supported.

The following example judges the range of the status code:

range:
  _ctx.response.code:
    gte: 400

The following combination example judges the range of the response byte size:

range:
  _ctx.request.body_length.gte: 100
  _ctx.request.body_length.lt: 5000

network #

If the value of a field is an IP address, you can use the network condition to judge whether the field meets a specific network range, whether it supports standard IPv4 or IPv6, whether it supports the classless inter-domain routing (CIDR) expression, or whether it uses an alias in the following range:

NameDescription
loopbackMatches the local loopback network address. Range: 127.0.0.0/8 or ::1/128.
unicastMatches global unicast addresses defined in RFC 1122, RFC 4632, and RFC 4291, except the IPv4 broadcast address (255.255.255.255) but including private address ranges.
multicastMatches the broadcast address.
interface_local_multicastMatches the local multicast address of an IPv6 interface.
link_local_unicastMatches the link-local unicast address.
link_local_multicastMatches the link-local broadcast address.
privateMatches the private address range defined in RFC 1918 (IPv4) and RFC 4193 (IPv6).
publicMatches public addresses other than the local address, unspecified address, IPv4 broadcast address, link-local unicast address, link-local multicast address, interface local multicast address, or private address.
unspecifiedMatches an unspecified address (IPv4 address 0.0.0.0 or IPv6 address ::).

The following example matches the local network address:

network:
  _ctx.request.client_ip: private

The following example specifies a subnet:

network:
  _ctx.request.client_ip: '192.168.3.0/24'

An array is supported and it is judged that the condition is met when any value in the array is met.

network:
  _ctx.request.client_ip: ['192.168.3.0/24', '10.1.0.0/8', loopback]

exists #

You can use the exists condition to judge whether a field exists. It supports the use of one or more character fields. See the following example:

exists: ['_ctx.request.user']

in #

You can use the in condition to judge whether a field has any value in a specified array. It supports a single field and the character and numeric types.

The following example judges the returned status code.

in:
  _ctx.response.status: [ 403,404,200,201 ]

queue_has_lag #

The queue_has_lag condition is used to judge whether one or more local disk queues are stacked with messages.

queue_has_lag: [ "prod", "prod-500" ]

When the queue type is FIFO, If you want to set the depth of a queue to be greater than a specified depth, add >queue depth to the end of the queue name. See the following example:

queue_has_lag: [ "prod>10", "prod-500>10" ]

The above example shows that the condition is met only when the queue depth exceeds 10.

consumer_has_lag #

The consumer_has_lag condition is used to judge whether delay and message stacking occur in the consumer of a queue.

consumer_has_lag:
  queue: "primary-partial-success_bulk_requests"
  group: "my-group"
  name: "my-consumer-1"

cluster_available #

The cluster_available condition is used to judge the service availability of one or more Elasticsearch clusters. See the following example:

cluster_available: ["prod"]

or #

The or condition is used to combine multiple optional conditions in the following format:

or:
  - <condition1>
  - <condition2>
  - <condition3>
  ...

See the following example:

or:
  - equals:
      _ctx.response.code: 304
  - equals:
      _ctx.response.code: 404

and #

The and condition is used to combine multiple necessary conditions in the following format:

and:
  - <condition1>
  - <condition2>
  - <condition3>
  ...

See the following example:

and:
  - equals:
      _ctx.response.code: 200
  - equals:
      _ctx.status: OK

You can combine the and and or conditions flexibly. See the following example:

or:
  - <condition1>
  - and:
    - <condition2>
    - <condition3>

not #

If you want to negate a condition, use the not condition in the following format:

not:
  <condition>

See the following example:

not:
  equals:
    _ctx.status: OK